Thanks for offering insight in on this, Lyle. I was just going to suggest that either you or Wayne could perhaps chime in with some info as to why it is the way it is.
Perhaps in a truly DSP-centric radio like the K3 limitations are different than in a more traditional analog rig, like the typical VHF/UHF FM mobile radio. I generally refer to CTCSS tones as "subaudible" tones as the level is usually kept low enough as to not be noticeable to the listener except in the quietest of environs, or if the transmitting station has the subtone deviation set too high. Actually, being able to receive down to 100 Hz can be quite helpful. On more than one occasion, I have been able to assist other operators with identifying power supply issues by the noticeably 120Hz (60 Hz full wave rectified) hum on their transmitted signal. 73, Bruce, N1RX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
