I have K3 #145 and this problem has plagued me plenty in the past. I now know it *is* a problem with the FP connections as Wayne describes. I've more or less stopped it by using Deoxit on the pins; clearly there is an issue with oxidation(?) of the pin surfaces.
BTW, Jorge states the radio performs normally even when the errors appear. Have you checked for example that the KAT3 works when Err AT3 appears, and that you get 100w out when the PA error appears? Mine certainly didn't..... 73, Stewart Rolfe, GW0ETF wayne burdick wrote: > > Could be intermittent contact between the Front Panel module and the > RF board. Try loosening all the screws on the FP module, backing it > out 1/8th inch or so, then plugging it back in. > > 73, > Wayne > N6KR > > -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-err-msgs-on-powr-up-tp6779491p6782577.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
