I hope you can read this, but do the values look reasonable, for a KX1 with the output power mod. Peak to peak (Vpp) voltages and RMS (Vrms) were taken with a high end O'scope and used to compute the Power values (Ppp and Prms).
Seems the KX1 read the supply voltage about 0.4 volts low. Thanks, Tom Crites, KC8SES KX1 Power Output Supply Voltage 14.0 KX1 Dispaly Voltage 13.6 Freq (MHz) 3.675 7.100 10.100 14.025 Output Vpp 43.10 35.00 34.70 35.30 Output Vrms 15.08 12.28 12.13 12.38 ATU Displayed power 4.5 to 5.0 3.00 3.00 3.50 Ppp (watts) 4.53 2.99 2.93 3.04 Prms (watts) 4.43 2.94 2.87 2.99 Supply Voltage 9.5 KX1 Dispaly Voltage 9.1 Freq (MHz) 3.675 7.100 10.100 14.025 Output Vpp 29.40 24.40 24.70 25.60 Output Vrms 10.14 8.43 8.52 8.94 ATU Displayed power 2.10 1.50 1.70 1.80 Ppp (watts) 2.11 1.45 1.49 1.60 Prms (watts) 2.00 1.39 1.42 1.56 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html