Tom, Yes, your values look reasonable. The KX1 will always indicate that the voltage is about 0.4 volts lower than read at your supply. There is a series diode to prevent damage from reverse polarity, so the inside of the KX1 sees a voltage that is one diode drop less than your supply.
73, Don W3FPR On 1/30/2012 9:44 PM, Tom Crites wrote: > I hope you can read this, but do the values look reasonable, for a KX1 > with the output power mod. Peak to peak (Vpp) voltages and RMS (Vrms) > were taken with a high end O'scope and used to compute the Power > values (Ppp and Prms). > > Seems the KX1 read the supply voltage about 0.4 volts low. > > Thanks, > Tom Crites, KC8SES > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
