Erwin, You must use the 2.7kHz (or 2.8) filter to transmit SSB (or CW or data) - the narrow filters are only for receive.
73, Don W3FPR On 2/15/2012 12:13 PM, DK5EW wrote: > Hi all, > I have a small understanding problem in using filters. > > I installed a additional SSB filter 2.1KHz/8pol on row 3. (1. is FM and > 2. is 2.7KHz). > I configured new 2.1KHz filter FL3_BW and set it with number 3 to 2.10, > FL3_Freq to 0.00, FL3_GN to 0db, FL3_ON to YES > > _What I do not understand:_ > On menu FL_TX_SB is now FL2 so I TX now with FL2(2.7KHz) ? Do I have to > switch there on FL3 to transmit with FL3 (2.1KHz) ? > Can I switch between filters in operating ? Is it then only in RX > between 2.1KHz and 2.7KHz filter ? > And TX filter is always that one I configured in FLTX_SB menu ? > > Thanks for reading ! > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
