Ron,

The 6 meter antenna connects directly to the XV50.

Since you have the K60XV, set up the XV50 for 1 mW input power, and set 
it as TRN1 (or 2 or 3 or 4, your choice) with the dip switches in the 
XV50.  Also set it for split TX/RX IF cables.  The K2 TRNx selection 
should match the DIP switch settings in the XV50.  Set the other menu 
parameters - especially the power equals Low and 1.00 mW.  That should 
make you "good to go"

When the KPA100 is connected, you cannot use the QRP ANT2 for anything - 
the presence of the KPA100 forces the KAT2 to ANT1.

When you have it set up correctly, the band switch will select 6 meters, 
the XV50 will turn on and you can TX/RX just like on the HF bands, but 
using the antenna that is connected to the XV50.

73,
Don W3FPR

On 3/2/2012 7:28 PM, KM4VX wrote:
> I have a K2/10 connected to a KAT100 and KPA100, both enclosed in the
> external EC2 enclosure. Works great, thanks to Don in Wake Forest. I just
> acquired a used XV 50 and have been trying to connect it to my K2 setup. I
> can't figure out how to connect the antenna output from the transverter to
> my 6 meter dipole. I have the antenna 1 port from the K2 going to the EC2,
> and two antenna ports  from the EC2 going to antennas.  I control antenna 1
> and antenna 2 on the EC2 with the K2 antenna switch/button; this is normal.
> I now have a free antenna 2 port on the K/2 and the single antenna port on
> the XV50. The instructions ((XV50,K60XV (which I have and use with the
> transverter) and K2))  indicate the coax to the 6 meter antenna should be
> directly from the transverter. That doesn't seem to work. How does the K2
> know which antenna port to use?  Should I use antenna 1 or antenna 2 switch
> on the K2? The antenna 2 output on the K2 is not connected to anything now
> based on the way it is connected to the EC2; K2 uses only antenna 1 port
> although ports 1 and 2 are used from the KPA100 to antennas. Thanks. Ron
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to