>>>>> "Jim" == Jim Brown <j...@audiosystemsgroup.com> writes:
Jim> On 3/24/2012 1:19 PM, Pierfrancesco Caci wrote: >> Jim, how do you set the little volume control? Jim> I've never found a gain control for Record. :) There are two inputs -- I was talking about the rotary control on the side of the box. Jim> a Line level input that I suspect is designed to work at a few volts, Jim> and a Phono input which is designed to work at the level of a phono Jim> cartridge (the type used to play vinyl records). Jim> The Phono input has RIAA equalization, which boosts low Jim> frequencies and Jim> rolls off high frequencies. I use the Phono input with a simple RC Jim> filter network between the radio and the Numark. I'm going Jim> from memory, Jim> but I believe what I used was 200 ohms across the output of the radio, Jim> 200 ohms across the input to the Numark, and 0.22 uF between the radio Jim> and the Numark. This simple network is designed specifically to match Jim> the K3. The Phono input has a LOT more gain than the Line Jim> input, so this Jim> gives the unit the ability to handle any signal level you're likely to Jim> get from a radio. Interesting. If it has more gain, isn't it more likely to saturate, given that the radio has a Line level output? Your suggestion seems counterintuitive to me, I must be missing something. Pf -- Pierfrancesco Caci, ik5pvx ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html