I think one important matter is being overlooked - when properly installed, the transformer will not move. The fact that the screwhead is touching the plastic wrap on the transformer is likely OK. If things do not move about, that spacing should stay the same.
73, Don W3FPR On 3/27/2012 3:25 PM, Scott Manthe wrote: > Hi Dave, > A quick Google search indicates that the KPA500 has been used on at > least 5 DXpeditions that I've found: T2T, HK0NA, 5V7V, ZD8D, and J68/W0MU. > > Since the amp was designed specifically for that purpose in my, I'd be > surprised if the design team let a potential issue like that survive the > process. You might check the assembly manual again to see if it's > possible you missed something. > > Regards, > Scott, N9AA > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html