Gary, If it is OK now, don't 'fix' it any more.
If the end points for all the bands fall between 1.0 volt and 7.5 volts (1.5 to 7.0 volts is even better, but not achievable after installing the K60XV), all will be well. If you have some out of that range, you may want to re-wind T5, but spreading/squeezing the turns is a valid method of adjustment. 73, Don W3FPR > -----Original Message----- > > Hi Gang > Im building K2 4988,and on Alignment and test part 2 / VCO > alignment, I could not get L30 adjusted to 6 volts on R30, Started > rechecking my work as per directions,everything was fine,so directed > my attention to T5,adjusted the spreadings of T5 and was able to get 6 > volts at R30,My question is should I rewind T5 ,or just leave T5 alone > and move on? > Thanks W4GNS > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.9.7/60 - Release Date: 7/28/2005 _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
