Steve, How are you determining the power output? Is the 8 watts and the 40 watts what is indicated on the K2 or what is indicated on an external wattmeter. If it is an external wattmeter, then the answer is easy - calibrate the forward power pot in the KPA100.
OTOH, if the power indication is on the K2 display, look carefully at your dummy load. A good 50 ohm dummy load connected directly to the K2 should provide a power output of 2 watts and 20 watts on the K2 display (but the KPA100 wattmeter still needs to be calibrated before the actual power is equal to what the K2 displays). 73, Don W3FPR > -----Original Message----- > > > Hi all, > My KPA100 seems to be performing well. However, when I'm in tune at low > power I get about 8 Watts out and with High power tune is > producing about 40 > Watts out. I think its supposed to be 2 W and 20 W. What should I do? > > Steve, W2MY > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.10.2/65 - Release Date: 8/7/2005 _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com