Sebastian, The AGC threshold is something the typical operator will rarely change. We didn't make any effort to eliminate switching artifacts as you change the menu parameter, though we could if it turns out to be an issue.
73, Wayne N6KR On May 12, 2012, at 11:30 AM, Sebastian, W4AS wrote: > I'm not a fan of NR, however since it's back in 4.51, I decided to > try it again. > > I thought some of the NR settings appeared to be excessive, to the > point of eliminating the signal I'm trying to listen to. But then I > remembered that finding the best NR setting takes time (it's not > instant). > > Setting NR F4-4 on CW with a relatively strong signal is amazing. > At first it seems as if the audio has been turned down completely as > the background noise disappears; but when the CW signal comes back, > it's nice and crisp and at a good audio level. This is with AGC THR > at 16 and SLP at 9. > > The not so good news: there is a 'thud' heard on CW mode when the > AGC THR is increased starting at 15 up to 20, and then from 20 down > to 15; regardless of the SLP setting. On SSB it's more of a > 'swoosh' sound. > > This could have something to do with the receive equalizer as it > doesn't occur in TX DATA mode where it is bypassed. Was it there > before? > > 73 de Sebastian, W4AS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
