I have had similar problems which ended up being poor connections from the power supply, where crimped connections, like on the power poles are not making good contact. Now I solder all DC connections from power supply, if possible. Also, these poor connections lower the power/amps making it to the rig, causing strange problems. Good luck 73 Emory WM3M
-----Original Message----- From: Lee Buller Sent: Saturday, June 23, 2012 10:16 PM To: Elecraft Reflector Subject: [Elecraft] K3 just goes off This has not happened to me before.... Running some FD here on CW for about an hour in an AC room PA 35C FP 31C The rig just went off. Dead. Power supply is ON. Pressed the power button....comes back on. Anyone see this before....I have not. Lee In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine? Common Sense is the image of the Creator expressing revealed truth in my mind. - John W. (Kansas) Never interfere with anything that isn't bothering you. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
