Any progress on this team? Thats another 4 months.... 73 Simon ZL4PLM Check out more information on the world 50 MHz and Up : www.zl4plm.com
From: gm4...@hotmail.com To: n...@elecraft.com; dro...@necg.de CC: elecraft@mailman.qth.net Subject: RE: [Elecraft] K144XV + K144RFLK issue Date: Tue, 6 Mar 2012 22:19:09 +0000 Hi Wayne RR Happy to beta help out fix the issue as required I know a few other VHF-SHF K3 owners will be willing too Cheers Simon ZL4PLM Check out more information on the world 50 MHz and Up : www.zl4plm.com > From: n...@elecraft.com > To: dro...@necg.de > Subject: Re: [Elecraft] K144XV + K144RFLK issue > Date: Tue, 6 Mar 2012 14:17:04 -0800 > CC: gm4...@hotmail.com; elecraft@mailman.qth.net > > This is likely to be a firmware issue and is on my list. > > 73, > Wayne > N6KR > > On Mar 6, 2012, at 1:02 PM, Oliver Dröse wrote: > > > Hi Simon, > > > > can you check if the behaviour is the same if you unplug the 10 MHz > > source? > > I have the K144RFLK myself and don't see that behaviour but I do not > > use an > > external 10 MHz reference. To me it seemms like the jumps could be > > due to > > frequency correction calculations from the external reference. To > > confirm > > that just plug it off and see if it still is the same. Just a > > thought ... > > > > Vy 73, Olli - DH8BQA > > http://www.dh8bqa.de/ > > > > > > > > > > ----- Original Message ----- > > From: "Simon Lewis" <gm4...@hotmail.com> > > To: <elecraft@mailman.qth.net> > > Sent: Tuesday, March 06, 2012 10:31 AM > > Subject: [Elecraft] K144XV + K144RFLK issue > > > > > >> > >> > >> HI All > >> > >> I dipped into the Elecraft world again with a K3/10 > >> > >> Plus Tvtr IF and K144XV > >> > >> Mainly as a transverter driver > >> > >> I bought the reflock for the radio and the transverter > >> > >> All is fine and my box is alive and well > >> > >> Just installed the K144XV and I notice an unusual change in receive > >> freq > >> when looking at a local beacon on 144 > >> > >> Every 3 secs or so it jumps about 10 Hz high or so then returns > >> back to > >> its normal freq - then 3 secs later does the same again > >> > >> not sure why its doing this any advice appreciated > >> > >> I have done all the cal routines and the main unit has 10 MHz > >> applied and > >> is locked - flashing * on the cal entry > >> > >> > >> I only just purchased it so I assume the firmware would be the > >> latest? > >> > >> Thanks > >> > >> Simon ZL4PLM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html