> The latest FW [4.51?] has a problem with CW Decode, fixes are coming.
As Wayne posted some time ago, there is no problem with CW decode *IF*
you set the AGC threshold and slope to values that match the pre 4.51
defaults. I don't remember what the "compatible" values are since I
prefer the improved receiver performance with the new firmware but I
would start with AGC THR between 2 and 5 and AGC SLP between 12 and 15
for best decoder performance (but not best receiver performance).
For grins, I set AGC THR=3 and AGC SLP=13, enabled the CW decoder and
was easily able decode about any CW signal I heard on 30 meters as
long as the sending station was not running his letters together (a
very typical problem - the human brain is better at separating CW
with "short" letter spaces than most decoders.
The issue is that most users tend to operate with 4.51 well below the
AGC threshold and with significant 'non-flat' slope above threshold.
That makes decoding much harder. The changes will introduce AGC into
the decoding path to restore the more constant audio level into the
decoder.
73,
... Joe, W4TV
On 8/14/2012 10:15 PM, Fred Jensen wrote:
> On 8/14/2012 6:28 PM, paul ecker wrote:
>> Sorry I know this just came up but here goes again. New K3 rig
>> operator and I can't get CW Decode to work.
>
> Firmware revision? The latest FW [4.51?] has a problem with CW Decode,
> fixes are coming. Try the earlier FW if CW decode is important to you.
> The new version does have some major improvements to the AGC and NR
> functions.
>
> 73,
>
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 2012 Cal QSO Party 6-7 Oct 2012
> - www.cqp.org
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
