Hi Gary, It sounds like your KRX3 filters are not configured correctly - and so at some bandwidth range(s), you're selecting a slot that has no filter in (or perhaps a bad or improperly installed filter). You should be able to see the XFIL display change (to indicate which slot is selected) as you adjust the bandwidth.....
73, ~iain / N6ML On Fri, Sep 28, 2012 at 6:50 PM, Gary Smith <g...@ka1j.com> wrote: > Thanks for the folks that answered. After futsing around with the > settings I now have the solution to this specific dilemma: > > I have three filters in the sub and when I entered B Set and played > with the different knobs, I found when I narrowed the filter width, > there came a point where the sub was working as it should be. This > was the solution to the problem and now the sub is working properly > on all bands and so is diversity. > > I'm sure this is mentioned in the manual somewhere but I never found > it. > > Hopefully this will help others who have this same problem come up. > > Gary > KA1J > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html