Hi Fred, That option (E850463) wasn't there last week - in fact it wasn't even there just now, until I reloaded the page ;)
73, ~iain / N6ML On Mon, Oct 8, 2012 at 12:44 PM, Fred Jensen <k6...@foothill.net> wrote: > Been gone for 5 days to Alpine County CA for the Cal QSO Party [N6A - > thanks for something around 2,700 Q's!], and came back to 200+ messages > from this list. > > A large number on K3<->KAT500<->KPA500 cabling. I wonder what I'm missing? > > From the KAT500 ordering page: > > "E850463 Optional KAT500 to KPA500 Cable" > > "KAT500 to KPA500 cable. Provides band data to KAT500 for band > change prior to TX,, and feeds through KPAK3AUX cable data from the K3 > to the KPA500. Typically used in addition to the KPAK3AUX cable from > the K3 to route band data, keying and AUXBUS data through the KAT500 to > the KPA500. (The KAT500 has AUX Cable IN and OUT connections.)" > > "This is the same 15 pin cable as is contained in the KPAP3AUX > cable set (see above, under the KPA500). That set also includes a Y > cable expansion adapter and a TX line keying interrupt adapter for the > K3 to KPA500 link." > > The KPAK3AUX cable is $35, the E850463 is $25. I presume the difference > is the Y-cable expansion adapted and TX line keying interrupt adapter > included in the KPAK3AUX cable set but not in E850463. > > I'll add the E850463 to my KAT500 order. If my understanding of the > KAT500 order page is incorrect, possibly someone could explain it to me, > although the above seems pretty clear right now. The E850463 won't be > lonely behind the rig. I often wonder when I'm back there why this is > called "wireless." > > I truly don't care how the "K-gizmos" talk to each other, or what they > say while they're doing it and I suspect I'm not alone. Unfortunately, > these threads usually drift into those sorts of details, to the > confusion of the uninformed. > > 73, > > Fred K6DGW > - Northern California Contest Club > - CU in the 2013 Cal QSO Party 5-6 Oct 2013 > - www.cqp.org > > On 10/6/2012 9:02 AM, iain macdonnell - N6ML wrote: >> On Sat, Oct 6, 2012 at 3:34 AM, Oliver Dröse <dro...@necg.de> wrote: >>> As far as I know AUXBUS just works one way (see the K3/KPA500 integration). >>> Otherwise there would not be any need for the BCD data from K3 to >>> KPA500/KAT500, would it? ;-) >> >> The KPA500 can only act as an AUXBUS sender, but the KAT500 is capable >> of both send and receive, as is the K3. >> >> Both KPA500 and KAT500 include "BCD" inputs to support non-Elecraft >> transceivers. > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html