Regarding the fan: Pull the top cover and make sure the fan's power cable is plugged in. It is easy to unplug the fan power while installing the rear panel.
On Tue, 9 Oct 2012 00:13:55 -0700 (PDT), Stan AE7UT <ae7...@gmail.com> wrote: >I just finished my KPA500 and am having some trouble. >I'm using it with a K3 and the Aux cable. > >It powers up fine. HV is 73.0, FAN CTL doesn't turn fans on. >The fan does not run when I turn it off as stated in the manual. >The KPA500 utility can't connect with it. >Using the same cable I can use the K3 utility without a problem. >The K3 switches the bands on the KPA500 and the KPA500 switches the K3 >bands. >The K3 indicates when I switch from standby to operate. >On standby I can operate with no problem. > >I have removed the front panel and reseated the cables twice. >I did not pull the transformer or play with the I/O module. >I'll do that tomorrow when I get a little more time. > >Anyone have similar problems? Any thoughts? >Of course I'll call Elecraft for help if nothing seems to work. > >73 >Stan AE7UT Amateur Radio Operator N5GE ARRL Lifetime Member QCWA Lifetime Member ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html