Yes, everyone has these symptoms. You can help the situation some by turning on the VFO NR in the menu. You have to unlock the menu by holding the rate button for 3 seconds until it says "Unlocked". This has to be done by band.
Bob AF9W KX3# 1736 On Oct 22, 2012, at 7:06 PM, David Holton wrote: > HI All > > I have a KX3, #262. > > I have an issue and I wonder if others have found the same, It's in relation > to the ENCODER. > > > > There is a distinct noise as you turn the tuning knob and it is seems to be > frequency sensitive. > > > > On the Bands from 1.8 to 10MHz there is No noise. > > On the Bands from 14 to 21MHz there is Light " rasping " noise. > > On the Bands 24MHz and 28MHz the noise Doubles to Medium. > > On the 50MHZ the rasping noise is double that on 28MHz and is Very annoying. > > > > The encoder I have in my KX3 is the one which is not soldered to the PC > Board. > > Anyone else have these symptoms? > > > > David, > > VK4DH > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
