On Mon, Nov 12, 2012 at 1:37 PM, Geoffrey Downs <geoffre...@madasafish.com> wrote: > Given that the transmitter gain calibration involves holding TUNE at 5w and > 50w on each band (either manually or via the utility), why does holding TUNE > at any other power level on any band not upset the tx gain calibration for > that band? Or does it?
Good question... Since the procedure requires power to be set to exactly 5.0W, it suggests that there's some special logic in the firmware that cause the calibration routine to kick in when TUNE is invoked with that setting. That seems to imply that one should not invoke the TUNE function at that power level under other circumstances, as an imperfect load could result in "decalibration".... 73, ~iain / N6ML ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html