Thanks for the quick reply. That's good information.
Best regards, Ken From: Walter Underwood [mailto:wun...@wunderwood.org] Sent: Thursday, February 07, 2013 8:22 AM To: Ken Schillinger Cc: elecraft@mailman. qth. net Subject: Re: [Elecraft] Using SB 200 With KX-3 You can set your FT-897 to 10W and try it. That is what this person did, and got 110W out: http://groups.yahoo.com/group/KX3/message/3927 wunder K6WRU On Feb 7, 2013, at 6:57 AM, Ken Schillinger wrote: Hi, My name is Ken / ke7hge and I'm new to the group. I haven't purchased a KX-3..yet. I am on the cusp. One question I have is regarding the possibility of connecting the KX-3 to a Heathkit SB 200 I have setting here. I bought the amp, installed the Harbach (sp?) soft key and soft start mods with the idea of using it with my Yaesu 897d. I have never hooked it up, but then again I have 100 W available with the 897. I'm considering selling my 897 to partially fund the KX-3, which would leave me at 10 - 12W which is fine, except.sometimes higher power is desired. What does everyone think, will the KX-3 and SB 200 be compatible, and if so; will I be able to drive the SB 200 to a point where I will get 60-70 W output? Thanks for your consideration, Ken / ke7hge ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html