A missing or not properly soldered C2 would do it. 73 - Mike WA8BXN -------Original Message------- From: W8DE Date: 2/23/2013 9:43:56 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K1 VFO frequency does not change I'm at the VFO range test in building of my K1. I go into the CAL menu, Display OSC and see a freq of 3.121 MHz. The frequency does not change when I turn the VFO tuning pot. I checked the voltage on the VFO POT signal and it goes between 0v and 5.935v. The voltage on D3 goes between 0v and 5.888v. Any suggestions on where I should look to determine why I cannot change VFO Frequency ? 73, John W8DE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html