Don, My K1 is working perfectly now. I discovered that by tightening down the front panel screw (under the tuning knob) I had pulled the FP printed circuit board away from the panel, and that meant the P1 and J1 connectors weren't parallel. After reinstalling the screw loosely, then pushing the front panel onto the RF board, and then carefully tightening that screw, I got good contact on all pins. It seems really strange to me that pin 5 was the only one having problems. Many thanks for your help... I learned a lot! David ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html