The reason I ask is that I get reports of very narrow audio when monitored by someone with a band scope. They saw between 2 and 2.5 , where most everyone else runs 3 to 3.5
Thanks Gerald On Aug 12, 2013 6:41 PM, "Don Wilhelm" <w3...@embarqmail.com> wrote: > Ed, > > Change 2 capacitors on the KSB2 board. C34 to 0.47 uF and C32 to > something in the 3300 pF to 5000 pF range. > > I usually run SSBC at 3-1 and SSBA at 1 with the Elecraft MH2 microphone > and it sounds good with those changes made. > > 73, > Don W3FPR > > On 8/12/2013 6:18 PM, Eddy wrote: > >> K2 serial number 3600+ using the Heil hand mic that Elecraft sells, also >> did the KI6WX wide-band mod years ago. When on LSB using the elecraft >> recommended settings of SSBA of 2-1 and SSBC of 2-1, I get lousy reports >> that there's too much base in my audio and hams find it hard to hear what >> I'm saying, but when I turn off compression I then get really good audio >> reports! >> >> >> So, for the K2 wizards out there, as long as I leave the compressor off, >> my hams friends are happy.......so, I'm wondering why turning on >> compression increases the base response and if there's a way to improve >> audio when using SSBC 2-1? I've used Spectrogram to slightly adjust audio >> filter bandpass but doesn't do much. >> >> As always, thanks for everyone's help! >> >> 73......ed >> >> k6sdw >> ______________________________**______________________________**__ >> Elecraft mailing list >> Home: >> http://mailman.qth.net/**mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft> >> Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm> >> Post: mailto:elecr...@mailman.qth.**net <Elecraft@mailman.qth.net> >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> > ______________________________**______________________________**__ > Elecraft mailing list > Home: > http://mailman.qth.net/**mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft> > Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm> > Post: mailto:elecr...@mailman.qth.**net <Elecraft@mailman.qth.net> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html