Well, I just did a test with my K3/KPA500 and it appears that Operate/Standby is NOT band dependent. I did this test. K3 was tuned to 80 meters and KPA500 in Standby mode. I switched to 20 meters and manually placed KPA500 in Operate mode. I then switched back to 80 meters but the KPA500 remained in Operate mode, it did not revert to Standby.
73, phil, K7PEH On Oct 15, 2013, at 8:08 PM, Jim Bennett <w6...@mac.com> wrote: > I had a KPA500 a year ago and in a moment of stupidity, sold it. Now > considering a replacement. Got a question about it's operation that I can't > for the life of me recall from my previous ownership. > > Let's say that I want to use the amp on all the HF bands except for 30 > meters. Does the KPA500 have a per-band memory for the "operate / standby" > function? Scenario: If I put the K3/KPA500 on 30 meters and place the amp in > bypass, then drop down to 40 meters and go to "operate" mode, and then later > on go back to 30 meters - will the KPA500 "remember" that I want it in bypass > mode, or do I have to do it manually? Looked in the downloadable KPA500 > manual, but saw no reference to this. > > Thanks in advance, Jim / W6JHB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html