I could not reproduce this problem. I have the latest firmware (including beta releases) on all of my K-Line (K3, P3, KPA500, and KAT500).
73, Tony K4QE On Tue, Feb 4, 2014 at 10:39 PM, Steve AI9T <st...@ai9t.com> wrote: > Anyone have any problems with the new Firmware. I installed the firmware > updates on the K3, KPA500, and KAT500 tuner. I had problems with the K3 > after the update. There was some kind of problem with the power output. For > starters I could not adjust the power out while the rig was keyed. For > instance I tried to adjust the power on my KPA500 from 250 watts to 500 and > could not adjust it while keying it. If I unkeyed I could raise the power a > bit on the K3, then key back up to see what the AMP output was, then unkey > to adjust again, then key to check again. > > I installed the older version of firmware back on the K3 and all was well > again. > > -- > 73 > > Steve AI9T > > http://www.ai9t.com > > AI9T DX Cluster > > Version 4 AI9T Telnet: dxc.ai9t.com port 7300 > Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer) > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
