Hi Don
True(ish) I tend to leave the rigs running for weeks on end
doing things like WSPR monitoring in their spare time.
However I do have access both local and remote access
to the power supply.
Stewart/G3YSX
On 05/02/2014 16:18, Don Wilhelm wrote:
I don't think it is at odds with the FAQ. Notice the part that says "at
least until you want to turn the rig off."
I think you *would* want to turn it off at some point.
73,
Don W3FPR
On 2/5/2014 11:05 AM, Stewart Bryant wrote:
Hi Don
That is at odds with the FAQ
http://www.elecraft.com/K3/K3FAQ.htm#auxbus
"I understand that if I short two pins from the ACC connector on the
back I can turn the rig on. When shorting those two pins is it
momentary or constant?
"Momentary (at least 0.5 second). Or you can leave it on permanently,
at least until you want to turn the rig off."
Stewart/G3YSX
On 05/02/2014 15:54, Don Wilhelm wrote:
Stewart,
See page 44 of the manual. You cannot simply strap between ACC pins 5
and 8 - that connection must be removed after the power off command is
sent.
73,
Don W3FPR
On 2/5/2014 9:49 AM, Stewart Bryant wrote:
I have a K3 that I wish to operate remotely.
I am happy to leave it running all the time, but I have a
computer controlled mains relay on the input of the PSU that I can
use to power cycle it if there is a problem.
Can I just put a link between pins 5 & 8 of the aux plug and
power on/off via the PSU mains?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html