Tony,
It is possible that something has gotten mixed up in your firmware.
Hopefully you have saved your KX3 configuration - if you have, you can
try an EEINIT (parameter initialization). See page 44 in the manual.
If you have not saved a configuration (using KX3 Utility), you can still
try it by saving the configuration first. The danger in saving the
configuration just before EEINIT is that the error you have could just
be brought back when you do the configuration restore.
If you do not have a saved configuration, you may be able to obtain the
factory configuration data file from Elecraft. Contact
supp...@elecraft.com to obtain that file.
73,
Don W3FPR
On 2/13/2014 6:33 PM, Antonio Matias wrote:
Hi Jim
sorry to trouble
but no fix the problem yet
all the same. the CMP wont get out of there, and i like to see the SWR/RF
reading
Some how it might need modified another item on menu or so.
I just can´t figure what can it be...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
