Mike Sexsmith wrote: > I have a K2 setup (#4819) with the 100 watt tuner/amplifier in separate > EC2 enclosure.
Mike, My K2/100 is also set up with my KAT100/ KAP100 in a separate EC2 enclosure. Last month I experienced a similar problem on 30 meters. Again I disconnected the KAP100 and KAT100 running the K2 with my internal KAT2 internal tuner. The KAT2 tuned everything fine. I reconnected everything, and then retuned every band using a dummy load. No improvement. I checked my coax, BALUN and ladder line to my antenna. I couldn't find any problems but adjusted the routing of my ladder line and then everything tuned up fine. I really don't think I fixed anything it just seemed to clear itself. I know this doesn't help your situation, but at least you know your not the only with this problem. I would be interested in hearing any solutions or recommendations that you discover. 73 KI4DGH Chuck Gehring _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com