If you installed your P3 as most of us, you have one RS-232 cable from your
PC to your P3, and from your P3 to your K3.  The same serial port is used
for your K3 as your P3.   If you successfully used your K3 Utility to find
your K3, might it have been connected through your P3?

The Device manager port speed doesn't matter, as the P3 Utility changes the
RS-232 speed itself. 

 The P3 Utility will try all the speeds, trying to find one that matches the
P3's RS-232 speed setting.

73 de Dick, K6KR



-----Original Message-----
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian Kahn
Sent: Saturday, March 29, 2014 14:50 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] [P3] New Computer, P3 Utility Doesn't See P3

Recently I replaced the computer in my shack.  When I did so, I moved the
PCI serial board from the old computer to the new one.  I then plugged my
K-line into the same ports on the computer as I originally had them plugged
into on the old computer (K3 into the integrated port, P3 and KPA500 into
the same ports on the PCI board).  I then downloaded and installed all the
latest utilities.  Each utility found its relevant system except for the P3
utility.  The P3 is plugged into one of two possible ports in the port list
in the P3 utility.  On either port, all the utility does is scan through the
various baud rates looking for the P3.  The baud rate on the P3 is set to
38400, as are the physical port configurations in Device Manager on the PC.
I verified the cables are all connected properly.  I verified the ports work
properly.  During this whole endeavor I didn't change anything in the
connections on my K-Line.

If anyone can make any suggestions as to what is causing this issue, I'd
appreciate it.  Thank you all in advance for the assistance.

73,

--Ian
Ian Kahn, KM4IK
Roswell, GA  EM74ua
km4ik....@gmail.com
K3 #281, P3 #688, KPA500 #1468
HRD v5.x/6.0 Test Team
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to d...@elecraft.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to