On Apr 17, 2014, at 5:53 PM, Stew <s...@ke4yh.com> wrote: > On 4/17/2014 8:25 PM, Tim Tucker wrote: >> All of the sudden my KX3's ATU cannot be seen by the radio and I can't >> figure out why. I went to the menu ATU.X MD and it says "not inst" and >> when I try to change the mode, it just says N/A. I tried pulling the ATU >> out and put it back in, which didn't help. It was working just fine since >> the day it was installed until tonight. Any thoughts before I call support? >> >> Thx, >> Tim > I just went through the same thing with my KX3. The problem was caused by > HRD. If you're using HRD try moving the "Low Pwr Slider" to 12Watts and see > if that does the trick. You will see ATU on the KX3's screen. Also the KX3 > menu will drop the .X and become just ATU MD. > I really like HRD for logging but it doesn't get along with KX3 very well.
I had posted the same issue on this list just two weeks ago. This has been reported to HRD and will be fixed in the next version. If you don’t touch the “high Pwr Slider”, the KX3 works OK with HRD. DM780 hangs when asked to transmit through rig blaster advantage + KX3, but that is a non-KX3 issue. — VaibhaV W7VAI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
