David Patino asks: > But the responses I'm seeing from > the KX3 don't appear to follow this > layout. Given an active frequency of > 1.200.325 the response is: > > DS@1\xB200\xB325\x80\x90; > > The appears to be the active > frequency in plain text, replacing > spaces with @'s and .'s with \xB, > only the last two entries for icon > data and extended data are 8-bit > bytes expressed in hex.
It looks like the digits are in plain ASCII, as suggested by the note that the minimum value is 0x30 (the ASCII code for "0"). The digits with a decimal point to their left are encoded as ASCII+0x80, so for example ".2" appears as "0xB2" because 0x32+0x80=0xB2. This would be clearer if each byte of the response is presented on its own line: D S @ 1 \xB2 0 0 \xB3 2 5 \x80 \x90 ; Hope this helps, -- Bill, AB1AV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
