It occurs to me that another option might be to connect the footswitch, with a pullup resistor to 5VDC, to pin 7 of the ACC connector, and set CONFIG:TX INH to HI=INH. This should prevent the K3 from transmitting except when the footswitch was pressed. You might want to wire an SPST switch in parallel with the footswitch so you could disable the inhibit function in other modes.
73, Rich VE3KI On 8/15/2014 1:33 PM, iain macdonnell - N6ML wrote: > I think it's an interesting idea. It seems it should be feasible to > implement in firmware, but maybe non-trivial. > > Thinking outside the box; what if you route the mic signal through the > footswitch instead of PTT? Or maybe through a relay that the > footswitch triggers... and keep VOX on all the time. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com