Hi Dan,
Wow! That's a lot of money to spend only to find I don't need the darn
thing! I'll be talking to Elecraft about that next week. I ordered
both about 3 weeks ago. Thanks for letting me know. I appreciate it!
73,
Ken
On 2014-08-30 9:04 PM, Don Wilhelm wrote:
Ken,
If you have a recent XV432 (within the past 2 months), it is being
shipped with the High Accuracy crystal.
Look at the markings on the crystal that came with the XV432, and
compare it with the crystal shipped with the High Accuracy Kit - if it
is the same, you can put either crystal in and Check L19 as well, they
should be the same.
In other words, the High Accuracy Kit is a retrofit for older XV432
transverters, and is not necessary for new ones.
73,
Don W3FPR
On 8/30/2014 6:26 PM, Ken Alexander wrote:
Hi folks,
I'm working on my XV432 kit this weekend. I ordered the high
accuracy crystal and the crystal oven options as well. I'm on page
31 of the XV432 manual, where it is asking me to locate L4 and L19
for installation. I see that L19 appears to get replaced when
installing the high accuracy crystal option.
The manual says:
L4 has an orange body with four turns. (It looks red to me and it
has 3.5 turns, close enough I guess)
L19 has a yellow body with four turns. (I count 4.5 turns,
_definitely_ one more turn than L4. At least it's yellow)
The installation instructions that come with the high accuracy
crystal option say to remove L19 from the circuit board. Since I'm
just about to install it this seems like a good time to make the
substitution. EXCEPT, it says that L19 has a RED plastic coil form,
not yellow like the XV432 manual says. I do note that the substitute
coil that comes in the high accuracy crystal option is yellow and has
exactly the same 4.5 turns as the yellow bodied coil called L19 in
the XV432 assembly manual.
I assume the error is in the instruction sheet for the high accuracy
crystal option, and that they meant to say that L19 is yellow and not
red. However, I'd feel safer if someone who has built one before
could kindly confirm this.
The second thing that bothers me is why does one 4-turn inductor have
one more turn than the other 4-turn inductor?
Any assistance will be gratefully accepted.
Thanks and 73,
Ken Alexander
VE3HLS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com