Joel, Perfect!
I found I must put the command at the end of the string on my Digital PF and it must be first in the voice one. That latter because if it is at the end, the KX3 goes into a state where the VOX trips and clicks repeatedly until you kill power to the rig. Easy fix. I was looking on Page 23 of that same revision of the manual and did not look further because of what it stated there about the command. Thanks for the help! 73 K5RHD /randy On Sat, Nov 29, 2014 at 5:15 AM, Joel Black <joel.b.bl...@gmail.com> wrote: > Randy, > > Sorry, I saw your string of macros and completely glazed over the first > question. > > Try this: “SWH29;" > > This is on page 29 of the Elecraft K3 and KX3 Programmer’s Reference, Rev. > E11, Oct 24, 2013. > > I just tried it on my KX3 and it only *toggles* VOX between on and off. > You’d have to put that command in each macro - once to turn it on for DATA > and once again to turn it off for phone. Is that what you were needing? > > 73, > Joel - W4JBB > > > On Nov 29, 2014, at 12:12 AM, Randy Diddel <k5...@arrl.net> wrote: > > > > Hello Bill, > > > > A toggle should be easy at least in terms of programming. A set command > > with a 0 or 1 would be all it would take. The programmer's manual I have > > states one will be made available in the future. My question was if we > were > > 'there yet' and does anyone know the syntax if it had. > > > > 73 > > > > /randy > > > > On Fri, Nov 28, 2014 at 10:56 PM, Nr4c <n...@widomaker.com> wrote: > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com