hi Ron - ol' #525 has been getting pretty scratchy lately, and it has the AF Pot Mod. I guess they just get old and scratchy like the rest of us...;-)
I found my misplaced XG1 the other day and went around measuring rigs. #1250 was singing along at MDS=-136dBm, but #525 wasn't close (haven't used it since Field Day, I'm afraid). After a bit of poking around, I found a marginal solder joint had finally gone bad in the T-R switch (RFC2). Some new solder and good as #1250! cheers! - jeff wk6i At 07:54 PM 1/3/2006, Ron D'Eau Claire wrote: >>From the serial number you might consider making the audio gain pot mod >while you're in there if it hasn't been done yet. It makes a huge difference >in how the audio pot operates, making adjustment less touch even with a new >pot. > >On the Elecraft web site, go to Builder's Resources / Application Notes / K2 >AF Pot Application Note for details. > >Ron AC7AC > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Bill Allen >Sent: Tuesday, January 03, 2006 6:51 PM >To: elecraft@mailman.qth.net >Subject: [Elecraft] Time for a new Volume pot? > > >The volume knob has gotten very, very touchy lately. Very scratchy when >adjusting and suddenly blaring at top volume. Is it time for a new volume >pot on my K2? > >73, >Bill Allen - wa5pb >K2# 1068 -- Jeff Stai [EMAIL PROTECTED] Twisted Oak Winery http://www.twistedoak.com/ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com