Scott,
OOPS! I picked up Gerard in the thread. However, my response of
just a few minutes ago is correct. In your case I should have added that
you need to set the signal I/O device to the sound card you use for the
spectrum display. This way you get more than just the 3 KHz bandwidth
you are using and you can use narrow filtering for listening without
effecting what skimmer is doing. I hope this is all clear.
73,
Barry
K3NDM
On 7/21/2015 10:08 PM, Scott Simpson wrote:
What settings do you use? I was just using the 3kHz radio option.
73 KF5WAY
On Tue, Jul 21, 2015 at 8:37 PM Bob Stephens <a...@bobandgloria.com> wrote:
I have successfully used the KX3 RX I/Q with CW Skimmer. You will need a
sound card with stereo input (Signalink won’t work) and possibly isolation
transformers on the input to the sound card to remove spurious signals. I
used a Griffin iMic which is not the world’s best sound card and isolators
from Radio Shack. If you are going to buy a sound card for this
application get one with at least 96K bandwidth so you can see the entire
CW sub-band on most bands. Also, I had to change the Skimmer settings to
use Q/I instead of I/Q. Once you get it set up it is great. My goal is to
get a PX3 and run Skimmer off of the PX3 output. I got to play with it one
weekend and it is the ultimate setup for CW contests that allow assists.
First post here.
Can the KX3 RX I/Q output be used with the CW Skimmer program?
Anyone any experience with this?love to hear.
Gerard VK2JNG
73 de AF9W
Bob Stephens
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to sasimp...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k3...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
