Don,
to set things up, I use a macro programmed in the F12-key in N1MM to
copy the freq/mode/BW From A to B, switch on the SubRx, set audio to
A-b listening and Link the VFO's. Switching of the audio is done in
F9-F10-11 to A-b, A-A, or b-b respectively.
Of course I would like that I could switch the audio when the K3 is in
diversity mode, but That cannot be done in current Firmware. In
diversity the audio is fixed to A-b.
73
Arie PA3A
Don Wilhelm schreef op 2-8-2015 om 19:06:
Arie,
When in diversity, normally both the SubRX and the Main RX are
controlled by VFO A.
You must be in SPLIT to do what you are doing. Is that true?
73,
Don W3FPR
On 8/2/2015 10:34 AM, Arie Kleingeld PA3A wrote:
Hi all,
I might be one of few people who use the Linked VFO's in diversity,
not that I want to, but because I have to.
When listening to diversity I am stuck with the L-MIX-R setting to A-b.
Some times I want to switch from A-b to A-A or b-b and back
again. It is used when I need to listen to only one antenna because
of very weak signal or QRM via the other antenna to my other ear.
This switching cannot be done when the K3 is in diversity mode, which
is a pity. That's why I Link the VFO's. (All done with computer macro
commands of course).
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
