Hi Do people still ask about the venerable K2 on this group? hi my K2 serial # 5312 :
I built it 9 yrs ago now. SO, I went back and (nervously) re-opened my K2 and re-did some of the calibration routines. The 4 Mhz calibration would not zero beat at 4.0000 Mhz but at 3999.8 The PLL ref Bosc range was OK BFO test was OK The CAL FCTR procedure would not allow zero beat on WWV 10 Mhz sig. Readings were zero beat at 10000.19. Needed to get FCTR to 14911.82 could only get to 14912.08 a diff of 1.74 Re-did PLL as required. No probs there. I am aware of the limitations of freq calib with the K2 when in the Hz range However I did not used to have this much of a problem. I am probably missing something obvious. That’s where you guys come in! Thanks John AB8O ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
