Hi Mark, Barry's recommendation is what I did, however, there is one other thing to consider. This topic was discussed a few years ago on the reflector and Lyle advised that it was not recommended to peak up a desired frequency on CW. Only use negative settings for undesired frequencies. The reason was that at narrow DSP width settings like 50Hz or 100Hz the RX EQ is cut off. So if you had a peak setting of 8db in the RX EQ and you narrowed the bandwidth you would hear a sudden decrease in audio volume of 8db as you turned the width knob counter clockwise.
Of course that was many firmware revisions ago so this might not still be true. 73, Mike K2MK pastormg wrote > Good Evening, > I have been tinkering around with the RX EQ #'s for CW. Would anyone have > any good settings to recommend? > Mark Griffin, KB3Z -- View this message in context: http://elecraft.365791.n2.nabble.com/CW-RX-tp7606756p7606759.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com