Sounds like your roofing filter configuration is not done correctly (especially check offsets), or your filter placement does not match your definitions. Something of that sort. This stuff is usually set in the K3 utility.
73, Guy K2AV On Sun, Sep 13, 2015 at 4:16 PM, G3XVR <danny.higg...@keme.co.uk> wrote: > The problem is different on 80M and 6M. On 80M I can get full power on > Normal CW, but not much on CW Rev. The opposite is true on 6M. However, if > I reduce the bandwidth so that FL4 is selected instead on FL2 I can get full > power on both bands and on both CW modes. If I select Split and use the > sub-RX, I can get full power on both bands, using both filters on both CW > modes. I sounds like a filter offset problem. I've reset it to what the > sticker inside the K3S says (-97 for main RX and -79 for sub RX). I assume > these figures are in Hz. Is there any way of confirming that there is an > offset problem? > > Danny, G3XVR > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/TX-Power-tp7607570p7607580.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k2av....@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
