I don't use any RXEQ and my pitch is usually between 400 and 450 Hz. Yes,
100->150 is "worse", although not particularly objectionable; a curiosity
actually. But there are other pops too, 750->800 is about the same and there is
also a dependence upon the shift.
On 10/18/2015 11:16 AM, Joe Subich, W4TV wrote:
On 10/18/2015 11:46 AM, Wes (N7WS) wrote:
As a point of reference, my old K3 with the original synthesizer
board pops when changing BW. It's most noticeable going from 150 Hz
to 100 Hz and vice versa.
There will be a slight pop when changing bandwidth between 150 and 100
Hz as the K3/K3S disables the RXEQ at bandwidths less than 150 Hz. The
level of the "pop" will be related to the amount of EQ in use *around*
*the center of the passband* (e.g., "pitch"). If for example, pitch is
500 Hz and bands 4 (400 Hz) and 5 (800 Hz) are 0, there will be little
or no "pop". However, if one has 400/800 Hz set for significant boost
there will be a fairly loud "pop" as the level changes.
73,
... Joe, W4TV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
