Changing to MCU 5.38 did not solve the problem. Need to contact K3 support! 73 Elliott WA6TLA
On Oct 23, 2015, at 10:57 AM, Elliott Lawrence <wa6...@icloud.com> wrote: > Using the latest K3 firmware MCU 5.35 for my K3 (not K3S). In the Data mode > only, setting the bandwidth of the main receiver also causes the subreceiver > bandwidth to track and be identical. The BSET control XFIL for Data has no > effect. In CW and SSB modes the main receiver XFIL can be adjusted and the > subreceiver XFIL changed independently using BSET. This was definitely not > the case for previous firmware versions. This operation is not band > dependent. > > I have checked all of the firmware notes and the latest K3S manual and can’t > find anything to explain this operation. Am I missing something? Is this a > new and unwanted improvement? > > Thanks for your comments. > 73 > Elliott WA6TLA > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wa6...@icloud.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com