Thanks to the many who offered suggestions in reply to my query. Some were very inventive; all are worth considering.
Specifically as to the KXPD2-K2 adapter (Fran¹s note below), the linked photo looks like a very good solution. However, the adapter seems no longer to be on the Elecraft Order Page. I¹ve sent an inquiry to Sales but no reply yet. They are probably busy this week. Meanwhile, if anyone has an adapter (and maybe even the KXPD1 paddle with it) that they¹d like to part with for a price, I might be interested. Please reply off-line. Tnx, Ted, KN1CBR >------------------------------ > >Message: 11 >Date: Wed, 23 Dec 2015 12:15:01 -0500 >From: Francis Belliveau <f.belliv...@comcast.net> >To: "Dauer, Edward" <eda...@law.du.edu> >Cc: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net> >Subject: Re: [Elecraft] CW Paddle for K2 >Message-ID: <d5af8aad-13c9-4014-ad62-ab4da6192...@comcast.net> >Content-Type: text/plain; charset=utf-8 > >Ted, > >If you want to stay truly portable you might want to check into the >"KXPD1-K2 Mounting Bracket"; I think that they are still available from >Elecraft. >It uses the K2 as the weight to hold a KXPD1 paddle so there is plenty of >weight without needing to have heavy paddles. You can see them at: >http://www.elecraft.com/KX1/kxpd1k2.htm > >It was designed to hold the KXPD1 paddles, build for the KX1 which are >very nice, but not mechanically adjustable. > >You might also think about making something similar for the KXPD3 >paddles, but the design would need to be very different. > >There are lots of other light-weight paddles available, but it sounds >like you are one of the heavy-handed users that Wayne ran into while >alpha-testing the original KXPD1-K2 design; they kept knocking the >bracket off the tilt stand. >That would mean you need a method to hold them down. > >I would also recommend one of the paddle sets from Palm Radio. I also >own a set of their mini-paddles and like them a lot. I >That model is sturdy enough to clamp down with an ordinary C-clamp. >I built a foldable wrist-rest attachment, using plexiglass, that allows >me to hold them in place by resting the wrist of my sending hand on it to >hold them in place. That makes for nearly infinite orientation options >with minimal weight. > >Good luck with your search. >73, >Fran > >> On Dec 23, 2015, at 08:42, Dauer, Edward <eda...@law.du.edu> wrote: >> >> Seeking suggestions about a CW iambic paddle for the K2. The latest >>posts I found in the archives go back to 2008. Anyone have experience >>they could share with paddles since then? I would like something with >>less mass than a Bencher, to keep the rig portable, but one that won?t >>walk across the table with real use. Thanks . . . >> >> Ted, KN1CBR > > >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
