I use Eneloop XX batteries in my KX3 with no problems. They are a very tight fit, but that is because of the low-resistance contacts in the KX3 battery holder. The 2nd generation Eneloop XX were renamed “Eneloop Pro”.
wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Jan 12, 2016, at 6:30 AM, Harry Yingst via Elecraft > <elecraft@mailman.qth.net> wrote: > > > I finally decided to get some rechargeable batteries (and the KXBC3) for my > KX3. > The Regular Eneloop are 2000 mAh and 1000 recharge cycles The Eneloop Pro's > are 2550 mAh and 500 Recharge cycles. > I'm not really concerned about the difference in recharge cycles so the Pro's > look like the ones to go with for longer run time. > I have read that the Pros are slightly larger and don't fin it some battery > holders but I would suspect that I would not have that issue in the KX3. > > Any thoughts? > > Thank you > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
