Thank you - that did it ----- The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence.
> On Jan 14, 2016, at 14:55, Eric Swartz - WA6HHQ, Elecraft <e...@elecraft.com> > wrote: > > Hi Kevin, > > Try removing each end of the IQ cable between the KX3 and PX3 and firmly > re-inserting it. What you are seeing usually is the result of one end not > being fully inserted in the jack, leaving one of the IQ lines open. > > Eric > elecraft.com > >> On 1/10/2016 4:42 AM, kevino z wrote: >> Not sure if it was the loading of the new KX3 firmware, or if I changed some >> settings, but now on my PX3 panadapter, I see everything symmetrically >> mirrored around the center. So for example, If there is a signal at Center >> frequency -50kHz, it appears at +50kHz too. As I move the VFO, the signals >> eventually converge and pass through the middle on their way to the ends of >> the display.Anyone have any idea how to fix this, or what I did to get in >> this mess?thank you -Kevin (KK4YEL) >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to eric.swa...@elecraft.com >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
