I have a K3 (1 of 2) that suddenly has lost all receive. I've checked
the obvious things.
- I'm not using the rx antenna
- I have antenna 1 selected and the coax is attached to it
- Diversity receive is turned off
I have disconnected all connections on the back of the rig. All I have
connected is the power supply and a length of coax connected directly to
an antenna (bypassing all antenna switches).
The rig appears to be transmitting just fine. If I press the xmit
button for a second I get the expected 20 watts out and the swr is 1.0:1
I have two K3's in the setup. Both are connected to a Microham MK2R+
which prevents both rigs from transmitting on the same frequency. I also
have a full set of 4O3A high power band filters in place to protect each
rig.
Any other suggestions? I plan on calling Elecraft later this morning as
well.
Thanks
Rich - N5ZC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
