Hi, just try to connect the K3 directly to your antenna. 73 de Hajo DL1SDZ
Gruss Hajo --- Cela est bien dit, mais il faut cultiver notre jardin. On Tue, Jan 19, 2016 at 1:26 PM, Richard Thorne <rtho...@rthorne.net> wrote: > I have a K3 (1 of 2) that suddenly has lost all receive. I've checked the > obvious things. > > - I'm not using the rx antenna > - I have antenna 1 selected and the coax is attached to it > - Diversity receive is turned off > > I have disconnected all connections on the back of the rig. All I have > connected is the power supply and a length of coax connected directly to an > antenna (bypassing all antenna switches). > > The rig appears to be transmitting just fine. If I press the xmit button > for a second I get the expected 20 watts out and the swr is 1.0:1 > > I have two K3's in the setup. Both are connected to a Microham MK2R+ > which prevents both rigs from transmitting on the same frequency. I also > have a full set of 4O3A high power band filters in place to protect each > rig. > > Any other suggestions? I plan on calling Elecraft later this morning as > well. > > Thanks > > Rich - N5ZC > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to dl1...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com