Try this:
http://marc.info/?l=elecraft&m=144267531705514&w=2
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message-----
From: n...@n1ix.com
Sent: Monday, February 8, 2016 10:09 AM
To: 'Elecraft'
Subject: [Elecraft] K3 problem
My K3 developed a problem this weekend.
None of the front panel pushbuttons work correctly.
For example:
ATU tune changes the AGC value
ANT = NB2
RX Ant = NB
PRE = ATU
SPOT = HI .Lo cut
CWT = CMP
etc.
Other pushbutton don't work at all.
A/B REV A->B, Band, Mode
The only button that works correctly is the "Power"
I've done a "parameter reset" I had to use the spot button
instead of
holding in the Shift knob.
I also tried reloading firmware,
Any other suggestions ?
Dave N1IX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to k6ll.d...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com