Problem is fixed thanks to Dave, K6LL and Elecraft support for the suggestions. Thanks for the great support and a fantastic reflector! If anyone need the fix it is at.
http://marc.info/?l=elecraft&m=144267531705514&w=2 Dave N1IX -----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of n...@n1ix.com Sent: Monday, February 08, 2016 12:09 PM To: 'Elecraft' <elecraft@mailman.qth.net> Subject: [Elecraft] K3 problem My K3 developed a problem this weekend. None of the front panel pushbuttons work correctly. For example: ATU tune changes the AGC value ANT = NB2 RX Ant = NB PRE = ATU SPOT = HI .Lo cut CWT = CMP etc. Other pushbutton don't work at all. A/B REV A->B, Band, Mode The only button that works correctly is the "Power" I've done a "parameter reset" I had to use the spot button instead of holding in the Shift knob. I also tried reloading firmware, Any other suggestions ? Dave N1IX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@n1ix.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
