Hi Gary, I don't know if it's right or wrong to do it the way you described. I chose to purchase a 2 port splitter from DX Engineering. Their part number is DXE-RSC-2. I suppose there are cheaper alternatives.
http://www.dxengineering.com/parts/dxe-rsc-2 73, Mike K2MK Gary Smith-2 wrote > My order is in Queue for a K3s. > > I currently have a K3 with sub Rx and have a HI-Z Rx antenna I use > with the K3. Sometimes I like listening with only the Rx antenna, > sometimes I like listening from the the Tx antenna. When I use > diversity I want to hear from both the Rx and main antennae. > > With the K3, what I have done with the Rx coax is attach it to a T > connector with one end attached to the BNC connector {27} Aux RF, > located below ANT 2 and the other leg connected to the RX ANT - IN on > the KXV3. > > Once I upgrade the two KBPF3 and Sub Rx board, I will migrate the Sub > RX to the K3s > > With the K3s, how should I connect the RX antenna to be most > effective with the K3s & diversity? As I have it now? > > Thanks, > > Gary > KA1J -- View this message in context: http://elecraft.365791.n2.nabble.com/K3s-Rx-antenna-tp7613833p7613837.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
